EPEVER SOLAR Demand CONTROLLER Set up: TRACER AN Collection CONTROLLE
EPEVER SOLAR Demand CONTROLLER Set up: TRACER AN Collection CONTROLLE
Blog Article
The EPEVER Tracer AN Collection Solar Cost Controller can be a extremely economical solar controller made for off-grid solar programs. Dependant on multiphase synchronous rectification engineering, it assures optimized Electricity conversion and process steadiness for a variety of photovoltaic (PV) purposes.
Key Functions in the EPEVER Tracer AN Sequence Controller
The Tracer AN sequence utilizes EPEVER Solar Cost Controller engineering for excellent solar Vitality harvesting. Essential capabilities incorporate:
Multiphase Synchronous Rectification (MSR) for enhanced Electricity conversion.
Advanced MPPT Algorithm with >99% efficiency.
Dual-Stage Charging for Increased battery existence.
Liquid crystal display Exhibit with authentic-time details monitoring.
Multiple Load Regulate Modes including handbook and timer.
Complete Electronic Protections in opposition to overcharging, about-discharging, limited circuits, and reverse polarity.
Phase-by-Action Tutorial to Starting the EPEVER Tracer AN Collection Controller
one. Unboxing and Preparing the Controller
Ensure all factors are involved: Tracer AN device, temperature sensor, conversation cables, and user manual.
Validate the design variety and voltage ratings match your solar panel and battery technical specs.
2. Mounting the Demand Controller
Find a very well-ventilated, dry site near to the battery financial institution.
Safe the Tracer AN controller utilizing the provided mounting brackets.
Preserve appropriate clearance for warmth dissipation.
3. Wiring the Photo voltaic Charge Controller
Caution: Usually adhere to correct protection protocols and make sure the method is run off in advance of connecting factors.
Action 1: Connect the battery terminals to your cost controller (optimistic to positive, negative to negative).
Move two: Link the photo voltaic panel array on the PV input terminals.
Stage three: Connect the load terminals if employing a immediate load link.
Stage four: Double-Check out all connections for polarity and tightness.
four. Configuring the Controller Options
Electricity within the controller by connecting the battery to start with.
Utilize the LCD Screen to navigate the configurations menu.
Configure:
Battery Type: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Management Modes: Handbook, timer, light-weight Management.
5. Monitoring and Facts Logging
The Tracer AN Sequence supports genuine-time checking utilizing the MT50 distant meter.
Information is usually logged through the RS485 communication port applying application like Photo voltaic Station Computer.
Distant monitoring can be done With all the EPEVER WiFi module.
six. Troubleshooting Frequent Issues
Situation 1: No Energy Output
Look at battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Difficulty 2: In excess of-Voltage Protection
Confirm the solar array’s voltage score.
Adjust process parameters if essential.
Challenge 3: No Battery Charging
Inspect PV wiring for continuity.
Affirm MPPT options inside the menu.
Benefits of the Tracer AN Sequence with MSR Technology
The multiphase synchronous rectification technologies guarantees:
Better Efficiency: Diminished energy losses for the duration of conversion.
Increased Reliability: Stable efficiency less than variable loads.
More time Battery Life: Steady Read more and precise charging profiles.
Conclusion
The EPEVER Solar Cost Controller with multiphase synchronous rectification technological know-how is surely an Fantastic choice for optimizing solar power era and increasing battery existence. By following the above set up manual, end users can be certain optimum effectiveness and process longevity.