EPEVER Photo voltaic CHARGE CONTROLLER SETUP: TRACER AN SERIES CONTROLLE
EPEVER Photo voltaic CHARGE CONTROLLER SETUP: TRACER AN SERIES CONTROLLE
Blog Article
The EPEVER Tracer AN Series Photo voltaic Demand Controller is usually a extremely efficient photo voltaic controller made for off-grid photo voltaic methods. Based on multiphase synchronous rectification technological know-how, it guarantees optimized Power conversion and process balance for a wide array of photovoltaic (PV) applications.
Crucial Features in the EPEVER Tracer AN Collection Controller
The Tracer AN series utilizes EPEVER Solar Cost Controller engineering for top-quality solar Electricity harvesting. Key characteristics involve:
Multiphase Synchronous Rectification (MSR) for improved energy conversion.
State-of-the-art MPPT Algorithm with >99% effectiveness.
Dual-Phase Charging for Increased battery lifetime.
Liquid crystal display Display with actual-time information checking.
Various Load Control Modes including handbook and timer.
Detailed Electronic Protections towards overcharging, more than-discharging, shorter circuits, and reverse polarity.
Phase-by-Step Guide to Creating the EPEVER Tracer AN Collection Controller
1. Unboxing and Making ready the Controller
Make sure all parts are included: Tracer AN unit, temperature sensor, communication cables, and user handbook.
Validate the model selection and voltage scores match your solar panel and battery specifications.
two. Mounting the Charge Controller
Decide on a well-ventilated, dry location close to the battery bank.
Secure the Tracer AN controller utilizing the offered mounting brackets.
Retain correct clearance for heat dissipation.
three. Wiring the Photo voltaic Cost Controller
Warning: Always abide by proper safety protocols and make sure the technique is run off right before connecting factors.
Move one: Hook up the battery terminals into the cost controller (constructive to favourable, adverse to negative).
Move 2: Connect the photo voltaic panel array towards the PV input terminals.
Action three: Connect the load terminals if using a immediate load connection.
Action four: Double-Test all connections for polarity and tightness.
four. Configuring the Controller Settings
Ability over the controller by connecting the battery to start with.
Make use of the Liquid crystal display Exhibit to navigate the settings menu.
Configure:
Battery Type: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Regulate Modes: Manual, timer, light-weight Handle.
five. Monitoring and Information Logging
The Tracer AN Series supports authentic-time monitoring utilizing the MT50 remote meter.
Data is usually logged by way of the RS485 interaction port employing software program which include Photo voltaic Station Laptop.
Distant monitoring is achievable With all the EPEVER WiFi module.
six. Troubleshooting Widespread Difficulties
Difficulty 1: No Ability Output
Check battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Challenge 2: Around-Voltage Security
Confirm the photo voltaic array’s voltage rating.
Alter process parameters if vital.
Issue three: No Battery Charging
Inspect PV wiring for continuity.
Validate MPPT options from the menu.
Great things about the Tracer AN Series with MSR Technological innovation
The multiphase synchronous rectification know-how makes sure:
Larger Performance: Lowered Electricity losses in the course of conversion.
Increased Reliability: Steady general performance below variable loads.
Extended Battery Daily life: Consistent More info and accurate charging profiles.
Conclusion
The EPEVER Solar Charge Controller with multiphase synchronous rectification technologies is really an exceptional option for optimizing solar power technology and lengthening battery lifestyle. By pursuing the above mentioned set up guideline, users can ensure optimum performance and procedure longevity.